LEXIBOOK BG100 Serie Mode D'emploi page 3

ENGLISH
UNPACKING
es
When unpacking, ensure that the following elements are included:
alle
1 x Giant Inflatable Ball
Balle
1 x repair kit
dans
1 x instruction manual
WARNING: All packaging materials, such as tape, plastic sheets, wire ties and tags are not part of this product
and should be discarded.
INFLATING THE BALL
pour
Use a manual air pump or an automatic air pump (not included) for inflation.
1. Unpack the product and unfold the ball on a flat surface.
2. Open the valve caps, then insert the large end of the air pump valve (not included). While holding firmly the
valve located inside the product, slowly inflate all the chambers until the ball is firm.
3. Make sure to close each valve tightly and push them inside the ball to avoid leakage or accidental deflation.
Note:
• Inflation by mouth can be difficult and will cause visible moisture to form on the inside of the ball.
CAUTION: Inflation using an air pump (sold separately) must be performed by an adult. Do not use a high
pressure pump or a pump for car tire. Do not over-inflate. Do not try to remove all wrinkles; always regular
check the level of inflation and stop inflates while the ball feels firm and supportive. Check before each use
and at regular intervals.
DEFLATING THE BALL
1. Open and squeeze all the valves to release air from the chambers.
2. Or insert a slim object such as a deflation tube (included in repair kit), to hold the valves open.
CAUTION: Deflation must be performed by adult, be careful not to puncture the Giant Inflatable Ball when
using the deflation tube, when deflating, do not force air out of the Giant Ball, allow air to escape slowly and
naturally. When deflated, fold the ball and store in cool dry place.
REPAIR KIT: INSTRUCTIONS
1. Thoroughly clean the damaged area.
2. Using scissors, cut a piece of patch (included in repair kit) large enough to fully cover the damaged area.
3. Tear off the protective paper from the patch and simply stick it on the damaged area.
raient
Note:
soit
• Temperature changes will cause your product to expand or contract.
e de
• In cold conditions, added inflation will be needed.
nte,
CAUTION: Repair must be performed by an adult. Checking before use is necessary.
ou de
on ou
hanger
posez
92 23
.com.
BG100seriesIM1048_V13_217.indd 3
3
23/1/18 4:49 pm