Bio Green PALMA 2.0 Instructions D'installation Et D'utilisation page 26

Palma 2.0 Bedienungsanleitung / Operating Instructions / Bruksanvisningen
3.2 Installation of Palma 2.0 heater
Warning! The distance from the inflammable objects should be at least 20"/ 50 cm. Adjust the
heater so that there is a distance of at least 16"/ 40 cm between the wall and the air intake
opening.
Warning! A free space of 1.5 meters should be left in front of the output opening if possible.
Place the heater in your greenhouse (4) .
Image 4
Now insert the mains plug into the socket of the Thermo 2(5) or, if operating without the
Thermo 2, directly into the mains socket (6).
Warning! Never insert or remove the power plug with wet hands. When using a multiple socket or an
extension cable please ensure that the maximum current carrying capacity is not exceeded. Cable
drums must always be completely unrolled. Do not wrap the connection cable around the device
and never operate the device with wound cable.
Image 5
26