Product Features; Display Elements - Bosch GLM 40 Professional Notice Originale

OBJ_BUCH-2264-003.book Page 23 Friday, December 18, 2015 2:54 PM
A) For measurements from the rear measuring tool edge, weak backlighting and 25 °C operating
temperature are applicable for high reflectivity of the target (e.g. a white-painted wall). In addition,
a deviation influence of ± 0,05 mm/m must be taken into account.
B) For measurements from the rear measuring tool edge, strong backlighting and – 10 °C to +45 °C
operating temperature are applicable for low reflectivity of the target (e.g. a black box). In addition,
a deviation influence of ±0.15 mm/m must be taken into account.
C) The width of the laser line depends on the surface characteristics and on the ambient conditions.
D) except battery compartment
The measuring tool can be clearly identified with the serial number 9 on the type plate.

Product Features

The numbering of the product features shown refers to the illustration of the measur-
ing tool on the graphic page.
1 Display
2 Measuring button[
3 Minus button[–]
4 Function button[Func]
5 On/Off button[ ]
6 Plus button[+]
7 Battery lid
8 Latch of battery lid
9 Serial number
10 Laser warning label
11 Reception lens
12 Laser beam outlet
13 Laser target plate*
14 Laser viewing glasses*
* The accessories illustrated or described are not included as standard delivery.

Display Elements

a Laser, switched on
b Temperature warning
c Battery low indicator
d Value
e Unit of measure
f Measuring functions
Bosch Power Tools
]
English | 23
1 609 92A 23E | (18.12.15)