Memory Functions - Bosch GLM 40 Professional Notice Originale

OBJ_BUCH-2264-003.book Page 28 Friday, December 18, 2015 2:54 PM
28 | English
The first measured value is shown at the top of the display.
After the second measurement has been completed, the height will
be automatically calculated and displayed. The end result is shown
at the bottom of the display, while the individual measured values
are shown above it.
Deleting Measured Values
Briefly pressing the On/Off button 5 [
measuring functions. Repeated brief pressing of the On/Off button 5 [
the measured values in reverse order.

Memory Functions

Memory value display
Maximum 10 values (measured values or end results) can be retrieved.
To display memory values, repeatedly press button 4 [Func] until symbol
shown on the display 1.
The number of the memory value is shown at the top of the display,
the corresponding memory value is shown at the bottom and the cor-
responding measuring function is shown on the left.
Press button 6 [+] to browse forwards through the saved values.
Press button 3 [–] to browse backwards through the saved values.
If there is no value available in the memory, "0.000" is shown at the
bottom of the display and "0" at the top.
The oldest value is located in position 1 in the memory, while the newest value is in
position 10 (when 10 memory values are available). If a further value is saved, the
oldest value in the memory is always deleted.
Deleting the Memory
To delete the contents of the memory, press button 4 [Func] so that symbol
pears on the display. Then briefly press the On/Off button 5 [
played value.
If the measuring tool is switched off during the memory function, the memory value
shown on the display will be deleted.
Adding/Subtracting Values
Measured values or end results can be added or subtracted.
1 609 92A 23E | (18.12.15)
] will delete the last measured value in all
] to delete the dis-
] will delete
is
ap-
Bosch Power Tools