1.
General Information
18
1.
General Information
1.1
Description of symbols
Warning!
This symbol warns of danger which
can lead to irreparable damages.
Caution!
This sign warns of possible
malfunctions caused by
operating error.
Note!
This sign draws your attention to
important information.
1.2
Safety notices
The intended use of this sensor is described
in these installation and operating instructions.
Warning:
Operation of the sensor other
as directed in these operating
instructions can lead to unsafe and
improper functioning of the device
and connected systems, and is
therefore not allowed.
Connection of the sensor and
maintenance work may only be
carried out by qualified personnel.
All repair work may only be carried
out directly by the manufacturer or
by an E+H service organisation.
Tampering with or making changes
to the device are not allowed and will
void any warranty claims.
Responsibility for adherence to the lo-
cally applicable safety regulations
lies with the operator of the device.
1.3
Declaration of conformity
The CUS 5 turbidity limit detector has been
developed and manufactured in accordance
with the applicable European standards and
directives.
Note:
The corresponding declaration of
conformity can be requested from
the manufacturer.
Turbidity sensor CUS 5
Endress+Hauser