Specifications - Panasonic AW-HS50E Mode D'emploi

4. Specifications

Inputs
Outputs
Signal formats
Signal processing
ME number
SDI inputs
DVI-D input
5 video lines
SDI 4 signal lines: SDI IN 1 to SDI IN 4
DVI-D 1 signal line: DVI IN
3 video lines, 4 outputs
SDI 2 signal lines: SDI OUT 1, SDI OUT 2
(Only the SDI OUT 1 signals are split into two)
DVI-D 1 signal line: DVI OUT
SD 480/59.94i, 576/50i
HD 1080/59.94i, 1080/50i, 720/59.94p, 720/50p, 1080/24PsF, 1080/23.98PsF
Y:Cb:Cr 4:2:2, 10 bit (8 bits for frame memory)
RGB 4:4:4, 8 bit
1ME
HD: Serial digital component (SMPTE 292M)
SD: Serial digital component (SMPTE 259M)
4 signal lines: SDI IN 1 to SDI IN 4
HD: SMPTE 292M (BTA S-004B) standard complied with
• 0.8 V [p-p] 10 % (75 )
• Input return loss More than 15 dB (5 MHz to 1.5 GHz)
• Automatic equalizer 100 m (when 5C-FB cable is used)
SD: SMPTE 259M standard complied with
• 0.8 V [p-p] 10 % (75 )
• Input return loss More than 15 dB (5 MHz to 270 MHz)
• Automatic equalizer 200 m (when 5C-2V cable is used)
Digital RGB (Vertical frequency: 60 Hz):
XGA (1024  768), WXGA (1280  768), SXGA (1280  1024),
WSXGA+ (1680  1050), UXGA (1600  1200), WUXGA (1920  1200)
Digital RGB: 1080/50p, 1080/59.94p
  Analogue input signals are not supported.
31 (E)