Parts And Their Functions; Control Panel - Panasonic AW-HS50E Mode D'emploi

1. Parts and their functions

1-1. Control panel

 POWER indicator [POWER]
This indicator lights when the POWER switch
() on the rear panel is set to ON while power is
supplied to the DC IN connector ().
 ALARM indicator [ALARM]
This indicator lights when the cooling fan ()
has stopped running, when there is a problem
with the power supply (voltage drop) or when
the temperature inside the unit has reached an
abnormally high level.
When this occurs, an alarm message appears on
the OSD menu while the OSD menu is displayed on
an external monitor (in the OSD ON status).
The alarm information can be output to an external
device from the unit's TALLY/GPI connector ().
 Refer to "5-2. TALLY/GPI" (<Operations and
Settings> Operating Instructions).
When an alarm has occurred, stop using the unit
immediately, and be absolutely sure to contact your
dealer.
Continuing to use the unit even after an alarm has
occurred could damage the unit.
Compact Live Switcher AW-HS50
POWER ALARM LINK
AUX PinP KEY-F/S
BUS DELEGATION
KEY-S
AUX
PGM PVW KEY OUT
1 6 2 7 3 8
KEY-F
PinP
AUX
USER 1 3 USER 2 4 SHIFT OSD/TIME
MIX WIPE PinP ON KEY ON
TRANSITION TYPE
A
SHIFT
CLN MV
4 9 5 10
B
SHIFT
 LINK indicator [LINK]
This indicator lights when the unit is linked on
a network with the AW-RP50 remote camera
controller available as an option.
The link setting must be enabled at both the unit
and AW-HS50.
11 (E)
OSD ON
FTB ON
CUT
AUTO
BKGD