Operations Using The Submenus - Panasonic AW-HS50E Mode D'emploi

2. Preparations

2-5-4. Operations using the submenus

1
Select the line with the setting item.
When the OSD/TIME dial is turned, the cursor ">" at the far left moves up or down.
Bring the cursor to the line with the setting item whose setting is to be changed, and then press the
OSD/TIME dial.
The cursor ">" now moves to the centre where the setting can be changed.
The value to be set now blinks.
Turn the OSD/TIME dial,
and select the item.
2
Change the setting.
While the setting is blinking, turn the OSD/TIME dial. The setting in the blinking part now changes.
  If a value has up to two decimal places, the speed at which the setting is changed can be increased by
turning the OSD/TIME dial while the SHIFT button is held down.
 Memo 
When values are changed for the regular setting items, these changes are reflected straight away but, with
some of the setting items (such as Format), the changes will not be reflected unless the OSD/TIME dial is
pressed once the changes have been made.
An asterisk () appears in front of the currently selected settings to identify these items.
This part blinks.
[Returning the setting to its default value]
When the OSD/TIME dial is held down now, the value is returned to its default value.
Press the OSD/TIME dial
to enter the item.
Turn the OSD/TIME dial to change
the setting that is now blinking.
26 (E)
The value to be set
now blinks.