Sentiotec HOME-C60 Mode D'emploi page 46

Instructions for use for the user
Filling the evaporator
CAUTION!
Risk of scalding
If you pour water into the hot evaporator tank, hot steam is created.
● NEVER pour water into the hot evaporator tank.
● Check and fill the evaporator tank each time before starting combi
mode.
● If the overheating protection has switched off evaporator heating, or
if your sauna control unit reports a lack of water, allow the evapora-
tor to cool down BEFORE you pour water into the evaporator tank.
CAUTION!
Risk of scalding
If the evaporator tank is too full, boiling water will spray out of the evap-
orator tank.
● Fill the evaporator tank with 5 litres of water.
1. Use a funnel 1 or remove
the soapstone 2.
2. Only fill the evaporator tank with fresh tap
water. You will need about 5 litres of water
for this. This amount of water allows the
evaporator to be operated for approximately
1 hour.
3. Remove the funnel 1 or put the soapstone
back in.
p. 20/26
1
2