Installation Location And Sensor Position; Safety Distances - Sentiotec HOME-C60 Mode D'emploi

Installation instructions, only for experts

4.1. Installation location and sensor position

Position the heater centrally in front of the air intake opening on the cabin wall.
Observe the safety distances to the cabin wall specified in Fig. 1.
Install the temperature sensor with excess temperature cut-out to the cabin wall
above the centre of the sauna heater. Maintain a distance of 15 cm to the sauna
cabin roof. Observe the assembly instructions for the sauna control unit.

4.2. Safety distances

Observe the minimum safety distances specified in Fig. 1.
Fig. 1 Safety distances
Home combi 6.0 kW and 9.0 kW
(HOME-C60 / HOME-C90)
Dimensions in mm
390 min 40
p. 9/26
100
405 50
EN