Publicité
Les langues disponibles
Les langues disponibles
Read all instructions. Failure to follow all instructions listed below may result
!
WARNING
in hazardous radiation exposure, electric shock, fire and/or serious injury. The
term "tool" in all of the warnings listed below refers to your mains-operated (corded) tool or battery-
operated (cordless) tool.
The following labels are on your laser tool for your convenience and safety. They indicate
where the laser light is emitted by the tool. ALWAYS BE AWARE of their location when
using the tool.
DO NOT direct the laser beam at persons or animals and do not stare into the
laser beam yourself. This tool produces laser class 2 laser radiation and complies
with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice
No. 50, dated June 24, 2007. This can lead to persons being blinded.
DO NOT remove or deface any warning or caution labels. Removing labels
increases the risk of exposure to laser radiation.
Use of controls or adjustments or performance of procedures other than those specified in
this manual, may result in hazardous radiation exposure.
ALWAYS make sure that any bystanders in the vicinity of use are made aware of the
dangers of looking directly into the laser tool.
DO NOT place the laser tool in a position that may cause anyone to stare into the laser
beam intentionally or unintentionally. Serious eye injury could result.
ALWAYS position the laser tool securely. Damage to the laser tool and/or serious injury to the
user could result if the laser tool falls.
ALWAYS use only the accessories that are recommended by the manufacturer of your
laser tool. Use of accessories that have been designed for use with other laser tools could result in
serious injury or unsatisfactory performance.
DO NOT use this laser tool for any purpose other than those outlined in this manual. This
could result in serious injury or unsatisfactory performance.
DO NOT leave the laser tool "ON" unattended in any operating mode.
DO NOT disassemble the laser tool. There are no user serviceable parts inside. Do not
modify the product in any way. Modifying the laser tool may result in hazardous laser radiation
exposure.
General Safety Rules
3 601 K63 K80
2
IEC 60825-1:2007-03
max output <1 mW @ 640 nm
Laser Radiation. Do not stare into the beam. Class 2 laser
product. Complies with 21 CFR 1040.10 and 1040.11 except
for deviations pursuant to Laser Notice 50, 6/24/2007
Rayonement laser. Ne regardez pas directement dans le
faisceau. Produit laser de Classe 2. Conforme à 21 CFR
1040.10 et 1040.11, sauf pour les écarts suivant l'Avis laser
50, 24/6/2007.
Radiación Láser. No mire al rayo. Producto láser de Clase
2. Cumple con las normas 21 CFR 1040.10 y 1040.11,
excepto por las desviaciones conforme al Aviso para
láseres 50 del 24 de juio de 2007.
SAVE THESE INSTRUCTIONS
-5-
Publicité
