Bosch TPA 300 Guide De Démarrage Rapide page 5

4 Connecting to a Bosch Diagnostic Tool
Step 1
Activate Bluetooth on TPA 300
1
On the main menu, select Connect to
scan tool then press
Step 3
Confirm Bluetooh Pairing
1
Confirm the Bluetooth pairing by clicking
Pair on the scan tool. Do the same on the
TPA 300 by selecting
Step 5
Select Vehicle
On the Bosch scan tool, Press Select Vehicle
> Select AutoID or Manual Selection > Select
Maintence Tests > Select TPMS Registration >
Select Tire Sensor Registration > "Use TPMS
Tool?" appears, Select Yes > Press all continue
buttons that appear.
TPA 300 | Connecting to a Bosch Diagnostic Tool | 5 | en-US
2
to continue.
2
.
Step 2
Activate Bluetooth on Scan Tool
On the Bosch scan tool, go to All Apps >
Settings > Bluetooth and wait until the
TPA 300 is detected. When the device
name appears, click on it to pair.
Step 4
Check if TPA 300 is correctly paired
On the Bosch scan tool, check if TPA_
xxxxx appears in the paired devices list.
Step 6
Read TPMS sensors with TPA 300
The Bosch scan tool will automatically select
the matching vehicle on the TPA 300. Use
the TPA 300 to read all the TPMS sensors.
To register sensors after readings, follow the
prompts on the Bosch scan tool.
1699502722 | REV. A | FEBRUARY 2020