Starting The Appliance - Euroflex Monster IB 35 Active Notice D'utilisation

4. Starting the appliance

- Insert the plug of the ironing board into the mains socket.
- Insert the iron to the outlet under the ironing board.
- Place the iron on the iron-rest mat (2).
- Turn the appliance on [mains switch (7)]. The orange indicator light (11) in the iron lights
up and stays on. The indicator light (11) comes off as soon as the soleplate reaches the set
temperature. The iron warms in 3-5 minutes. Pushing the on/off button the ironing board starts
warming as well. A built-in thermostat steadily controls the warming temperature of the ironing
board. While warming-up the appliance may emit some noises. It is a normal phenomenon,
that should not alarm you.
- As soon as the "ready-steam" indicator light (22) lights up the pressure has been reached and
the steam generator is ready to use. The steam generator warms up in about 10 minutes.
- For the suction function set the switch to the position "-"
- For the blowing function, set the switch to the position "+"
- To steam-iron all fabrics, set the temperature control (5) to the steam emission position.
- To steam-iron push the steam button (4) on the iron.
Power light
steam emission position
steam emission
23
on/off button
No water light
power indicator light
suction function
blowing function