Worx WX178.1 Mode D'emploi page 11

the Battery Pack energy faster than lighter working
conditions. Do not re-charge your Battery Pack below
32°F (0°C) and above 113°F (45°C) as this will affect
performance.
3. THE BIT LOCK
TM
ROTATE.
Pull the trigger and have the drill rotate briefly. The
Bit Lock Switch ring should release and operate as
TM
normal .
MAINTENANCE
Remove the battery pack from the tool before
carrying out any adjustment, servicing or
maintenance.
Your tool requires no additional lubrication or
maintenance.
There are no user serviceable parts in your power
tool. Never use water or chemical cleaners to clean
your power tool. Wipe clean with a dry cloth. Always
store your power tool in a dry place. Keep the motor
ventilation slots clean. Keep all working controls free
of dust. Occasionally you may see sparks through
the ventilation slots. This is normal and will not
damage your power tool.
ENVIRONMENTAL
PROTECTION
Waste electrical products must not be disposed
of with household waste. Please recycle where
facilities exist. Check with your local authorities
or retailer for recycling advice.
Lithium-Ion Cordless Drill/Driver
SWITCH WILL NOT
DECLARATION OF
CONFORMITY
We,
POSITEC Germany GmbH
Konrad-Adenauer-Ufer 37
50668 Köln
Declare that the product,
Description Battery-powered Drill
Type WX178.1 WX178.9 (1-designation of
machinery, representative of Battery-powered
Drill)
Function Drilling/Tightening and loosening
screws, nuts
Complies with the following Directives,
2006/42/EC
2011/65/EU
2014/30/EU
Standards conform to
EN 55014-1
EN 55014-2
EN 60745-1
EN 60745-2-1
EN 60745-2-2
The person authorized to compile the technical file,
Name Russell Nicholson
Address Positec Power Tools (Europe)Ltd,
PO Box 6242, Newbury, RG14 9LT, UK
Suzhou 2016/08/20
Allen Ding
Deputy Chief Engineer,Testing & Certification
11
EN