Icons Chart; Getting Started - Zavor LUX Manuel D'utilisation

Icons Chart

The icon appears when the lid is properly
closed and locked. After pressing START/STOP
to begin cooking, the icon disappears. If the lid
Close Lid
is off, the unit will beep and the icon will change
from open to close to let you know to close the
lid.
The icon appears when the lid is open or
removed. For the Brown and Flex (temperature
setting) functions the lid needs to be completely
Open Lid off the unit. After pressing START/STOP to
begin cooking, the icon will disappear. If the lid
is closed, the unit will beep and the icon will
change from close to open to let you know to
remove the lid.
The CUSTOM setting is used to program an
individual pressure level/temperature and time
in the functions: Pressure Cook, Slow Cook,
Brown, Flex (pressure & slow cook settings)
and Grains. Select F1, F2 or F3 by turning the
Favorite Menu dial and confirm by pressing the dial. Next,
select the desired pressure level and time and
press the dial to confirm. Press the START/
STOP button to begin cooking. The unit will
automatically save the settings for the selected
function.
Indicates that the buttons are locked. To unlock
Lock Icon
them, press and hold the PANEL LOCK button.
Indicates that the buttons are unlocked. To lock
Unlock Icon
them, press and hold the PANEL LOCK button.
After the setting is chosen, the icon blinks to
let you know to press the START/STOP button
Press Start
to begin cooking. Once the cooking process
starts, the icon will disappear.
Indicates that the unit has begun cooking after
Cooking
preheating.
Indicates that the unit is building pressure or
Preheating
temperature.
Preheat Bar Shows the unit's preheating progress.
Tells you when your unit is muted to silence all
Mute Icon
beeps and notification sounds.
8

Getting Started:

Before First Use
Read the safety instructions found in this manual before plugging in and
operating the unit. Before using the multi-cooker for the first time, follow these
steps:
1. Remove all packing materials and literature from inside the Zavor LUX™
LCD Multi-Cooker. Lift out the removable cooking pot and remove any
pieces of paper from under it. Remove the plastic protection from the
control panel and any stickers from the stainless steel body.
2. Wash all removable parts in warm soapy water. Rinse and dry all parts
thoroughly. Wipe the stainless steel outer housing with a clean damp cloth.
NEVER submerge the stainless steel outer housing in water or any other
liquid. Only the removable cooking pot is dishwasher safe.
3. To clean the pressure regulator knob, gently push the pressure regulator
knob down and turn it counterclockwise past STEAM to the CLEAN
setting. Once the dot on CLEAN is aligned with the dot on the base of the
pressure regulator, you can lift the pressure regulator up and out of the
housing. Look through the holes of the pressure regulator to make sure
there is nothing obstructing the pressure stream, then clean the pressure
regulator knob with warm soapy water, allowing the water to run through
the pressure regulator to remove all particles.
4. To put the pressure regulator back into the lid, simply align the CLEAN
setting with the dot on the base, gently push down on the pressure
regulator and turn the knob clockwise until it slides back into place.
5. Make sure the silicone gasket is placed properly inside the lid or else the
cooker will not function properly.
6. After thoroughly drying all parts, place the removable cooking pot back
into the multi-cooker before cooking.
9