Technical Specifications; Accessories; Spare Parts; Warranty - Kärcher IP 55 Mode D'emploi

Electrical connection
Voltage
Current type
Frequency
Connected load
Dry ice
Supply pressure, liquid carbon dioxide
Max. moisture content, liquid carbon dioxide
Oil content, liquid carbon dioxide
Diameter of dry ice pellets
Max. pellet production
Feed pressure for liquid carbon dioxide for max. pellet production
Dimensions
Width
Depth
Height
Weight, empty
Weight, full
Sound pressure level (EN 60704-1)
Hydraulic oil as per DIN 51524, part 2
Quality
Viskosity
Amount of oil

Accessories

CO Detector
2
Scale 600x800 mm with
control
Scale 1000x1000 mm with
control
Extruder plate 16 mm
Extruder plate 3 mm
Volume control PCS 55
Hydrauliköl, 20 l
Spare parts package

Spare parts

– Only use accessories and spare parts
which have been approved by the man-
ufacturer. The exclusive use of original
accessories and original spare parts
ensures that the appliance can be oper-
ated safely and trouble free.
– At the end of the operating instructions
you will find a selected list of spare
parts that are often required.
– For additional information about spare
parts, please go to the Service section
at www.kaercher.com.

Warranty

The warranty terms published by our com-
petent sales company are applicable in
each country. We will repair potential fail-
ures of your appliance within the warranty
period free of charge, provided that such
failure is caused by faulty material or de-
fects in fabrication. In the event of a warran-
ty claim please contact your dealer or the
nearest authorized Customer Service cent-
er. Please submit the proof of purchase.
14

Technical specifications

EU Declaration of Conformity
We hereby declare that the machine de-
Order No.
scribed below complies with the relevant
6.574-105.0
basic safety and health requirements of the
6.574-199.0
EU Directives, both in its basic design and
construction as well as in the version put
6.574-180.0 into circulation by us. This declaration shall
cease to be valid if the machine is modified
without our prior approval.
6.574-045.0
Product:
6.574-046.0
Type:
6.574-197.0
6.288-223.0
Relevant EU Directives
6.574-174.0
2006/42/EC (+2009/127/EC)
2014/30/EU
Applied harmonized standards
EN 55014–1: 2006+A1: 2009+A2: 2011
EN 55014–2: 2015
EN 626–1
EN 60204–1
EN 61000–3–2: 2014
EN 61000–3–11: 2000
EN 61000–3–3: 2013
EN 62233: 2008
Applied national standards
-
The signatories act on behalf of and with
the authority of the company management.
Chairman of the Board of Management
Documentation supervisor:
S. Reiser
Dry ice pelletiser
1.574-xxx
Director Regulatory Affairs & Certification
6
-
EN
V 400
3~
Hz 50
kW 1,6
MPa (bar) 1,3...2,1 (13...21)
ppm 66
absolutely free of oil
mm 3
kg/h 55
MPa (bar) 1,3 (13)
mm 1120
mm 600
mm 700
kg 141
kg 147
dB(A) 85
16/13 as per ISO 4406
ISO VG 32
l 6
Alfred Kärcher SE & Co. KG
Alfred-Kärcher-Straße 28-40
71364 Winnenden (Germany)
Tel.: +49 7195 14-0
Fax: +49 7195 14-2212
Winnenden, 2019/03/01