Signs And Symbols; Safety Information - Festo SOEL-RTD-Q50-PP-S-7L Instructions De Service Et De Montage

SOEL-

Signs and Symbols

Warning
This symbol signals passages in the manual which must be observed at all times. Non-compliance can cause
injuries or material damage.
Warning Laser
This symbol appears in front of warning passages concerning the danger of laser beams.
Information
This symbol signals passages with useful information.

Safety information

It is essential that this manual, and the safety information in particular, is read, thoroughly understood and
observed before setting the SOEL-RTD-Q50-PP-S-7 sensor into operation.
The SOEL-RTD-Q50-PP-S-7 sensor may only be connected by qualified personnel.
Interventions and alterations to the device are not permissible!
The SOEL-RTD-Q50-PP-S-7 sensor is not a safety component as described by EU machine directives and
must never be used in applications where human safety is at risk.
The SOEL-RTD-Q50-PP-S-7 sensor complies with laser protection class 2 according to DIN EN 60825/1,
status 2001. The technical requirements comply with EN 60947-5-2, 2000 edition.
Never look into the path of the laser. Do not suppress the reflex to close the eyelids.
Gazing into the beam path for longer periods can damage the retina of the eye.
When mounting the sensor, ensure if possible that the beam path is sealed off at the end. The laser must
not be directed at people (head height). When aligning SOEL-RTD-Q50-PP-S-7, ensure that there are no
reflections on reflective surfaces.
Should the safety label on the SOEL-RTD-Q50-PP-S-7 sensor be partly covered due to its installation posi-
tion, other safety labels are to be positioned on visible parts of the sensor. When applying the new safety
label, make sure that you cannot look into the laser beam whilst reading it.
22 Festo SOEL-...0608b English