Selecting A Language; Modifying Default Parameters In Td - Siemens SIMATIC S5 TD 390 Manuel

Modifying TD 390 Defaults
5.2

Selecting a Language

Selection Select a language as follows:
1. Select "Defaults" operating mode
L a n g u a
D e u t s c
The cursor is in the first line
2. Place the cursor in the 2nd line (see Fig. above).
3. Select next language.
4. Store the setting. The cursor returns to the first
line.
5. Exit to basic operating mode:
Press the key several times
"Exit" function is displayed.
6. Confirm "Exit" function by pressing
5.3

Modifying Default Parameters in TD 390

Modify defaults In the "Defaults" operating mode:
modify the defaults of the TD 390 in addition to the language.
– Number of the parametric DB
– Display mode of messages
– Scan time during which it is best to repeat a request for flag bits.
– Enable text DB.
– Input enable for all variables (only for clock, alarms and
operating hours).
The parameter settings are stored in a non–volatile memory.
5-2
Function
1st line
: e
g
h 2nd line
C79000–K8576–C292–01
Key
together
or
TD 390