2
Installing the TD 390
2.1
Scope of Delivery of the TD 390
1. TD 390
2. Power cord
3. Signal line (TD/PLC cable)
4. Spacers (self–adhesive)
5. Sealing ring
6. Documentation
2.2
Connecting the TD 390 to the PLC
Interface
Connect the TD 390 to the PG interface of the PLC using the supplied
TD/PLC cable (for information on the TTY interface see Annex A.3).
Power
The unit is powered via the supplied power cord (see Annex A.2 for
supply
technical data). You have the following options:
Direct connection to the PLC power supply (24 V DC)
Connection to an external power source (24 V DC, safety extra-low
voltage)
+
Power socket
TD 390
C79000–K8576–C292–01
1
6
9
–
TD/PLC cable
5
2-1