Kenwood BL237 Instructions page 4

Some drinks may separate on
standing, therefore it is best to
drink them straight away.
Separated drinks should be stirred
before drinking.
important
Never blend dry ingredients (e g.
spices, nuts) or run the Blender
empty.
Do not use the Blender as a
storage container whilst on the
power unit.
Some liquids increase in volume
and froth during blending e.g. milk,
so do not overfill and ensure the
blade assembly is correctly fitted.
To ensure long life of your Blender,
never run it continuously for longer
than 30 seconds.
Never blend food that has formed
a solid mass during freezing, break
it up before adding to the mug.
Never blend more than the max
capacities marked on the mug.
When the dispensing lid is fitted
always keep the travel mug
upright.
care & cleaning
Always switch off, unplug and
dismantle before cleaning.
Never let the power unit, cord or
plug get wet.
Always wash immediately after
use. Do not let food dry onto the
mug assembly as this will make
cleaning difficult.
Do not wash any part in the
dishwasher.
power unit
Wipe with a damp cloth, then dry.
blade assembly - Unscrew the
base from the mug. Then remove
the blade unit by pushing up from
underneath.
Care should be taken when
removing the blade unit from
the base.
1 Remove and wash the sealing ring.
2 Do not touch the sharp blades -
brush them clean using hot soapy
water, then rinse thoroughly under
the tap. Do not immerse the
blade assembly in water.
3 Leave to dry upside down away
from children.
dispensing lid
1 Remove and wash the sealing ring.
2 Wash the lid by hand, rinse with
clean water and dry.
mug
Wash by hand, rinse with clean
water then dry.
service and customer
care
If you experience any problems
with the operation of your
appliance, before requesting
assistance visit
www.kenwoodworld.com.
Please note that your product is
covered by a warranty, which
complies with all legal provisions
concerning any existing warranty
and consumer rights in the country
where the product was purchased.
If your Kenwood product
malfunctions or you find any
defects, please send it or bring it
to an authorised KENWOOD
Service Centre. To find up to date
details of your nearest authorised
KENWOOD Service centre visit
www.kenwoodworld.com or the
website specific to your Country.
Designed and engineered by
Kenwood in the UK.
Made in China.
4