Kenwood BL237 Instructions page 3

You can use your Blender for
making delicious and nutritious
cold drinks. The dispensing lid
means that it can easily be
converted into a travel mug.
A selection of recipes can be
found at the back of the
instructions, and the handy
markings on the mug allow you to
mix ingredients of your choice.
Combinations of fruit and yoghurt
(both fresh and frozen), ice cream,
ice cubes, juice and milk can be
used.
before using for the first
time
Wash the parts: see 'care &
cleaning'.
key
sealing ring
blade unit
base
dispensing lid
lid sealing ring
mug
to use your blender
1 Fit the sealing ring
blade unit
located correctly in the grooved
area.
2 Clip the blade unit into the base
3 Add ice or frozen ingredients to
the mug .
This includes frozen fruit, frozen
yoghurt, ice cream or ice. These
can be added up to the level
marked 'max frozen ingredients'.
4 Add liquid ingredients to the mug.
This includes fruit (not frozen),
fresh yoghurt, milk and fruit juices.
These can be placed into the mug
to the level marked 'max capacity'.
5 Screw the blade assembly onto
the mug – ensuring the blade
assembly is fully tightened
Leaking will occur if the seal
is damaged or incorrectly
fitted.
6 Shake to disperse the ingredients.
into the
- ensuring the seal is
.
7 Fit the assembled mug to the
power unit – line up the tabs on
the mug with the grooves in the
power unit and then turn
clockwise until a positive click is
heard .
8 Select the required speed.
When blending recipes that include
frozen ingredients turn the control
to speed 1 for 5 seconds to start
the mixing process, then turn the
control to speed 2.
Allow the ingredients to blend until
smooth.
9 When the desired consistency is
reached, turn the speed control to
the 'off' position. Turn the mug
anticlockwise to release it from the
power unit.
10 Turn the mug the other way up
and unscrew the blade assembly.
11 Fit the sealing ring into the
grooved area on the underside of
the dispensing lid. Then fit and
lock the lid to the mug by turning
clockwise.
When you want to drink, simply flip
open the lid cover and clip into
position
consumed straight from the mug.
hints & tips
If you do not intend to consume
your drink immediately, keep it
refrigerated.
Ensure your drink is thin enough to
be able to drink from the
dispensing lid. To make a thinner
drink add more liquid.
Once your drink has reached the
desired consistency, you can use
the pulse 'P' to ensure all
ingredients are thoroughly
blended. Use the pulse 'P' to
operate the power unit in a start
stop action to control the texture
of your drink.
After blending, some drinks may
not be completely smooth due to
seeds or the fibrous nature of
ingredients.
3
. The drink can be