Storage; Care And Maintenance; Troubleshooting - Kärcher NT 14/1 Ap Adv Mode D'emploi

Masquer les pouces Voir aussi pour NT 14/1 Ap Adv:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 17
 Hold the appliance by the handle and at
the suction pipe to transport it, not by
the push handle.
 Pull the device behind you at the carry-
ing handle for transporting it over longer
distances
 When transporting in vehicles, secure
the appliance according to the guide-
lines from slipping and tipping over.
CAUTION
Risk of injury and damage! Note the weight
of the appliance in case of storage.
This appliance must only be stored in inte-
rior rooms.

Care and maintenance

DANGER
First pull out the plug from the mains before
carrying out any tasks on the machine.
Exchanging the flat pleated filter
 Open filter door.
 Replace the flat pleated filter.
 Close the filter door, it must lock into
place.
Replace the exhaust filter
 Release and remove the suction head.
 Turn the suction basket by 180° and
keep it aside.
 Unlock the filter frame and remove it.
 Remove the exhaust filter from the filter
frame.
 Insert new exhaust filter into filter frame
as per appliance overview.
 Insert the filter frame so that the X is
pointing toward the outside.
 Let the filter frame lock in.
 Insert and lock the suction head.
Cleaning the electrodes
 Release and remove the suction head.
 Clean the electrodes with a brush.
 Insert and lock the suction head.
14

Storage

Troubleshooting

DANGER
First pull out the plug from the mains before
carrying out any tasks on the machine.
Suction turbine does not run
 Check the receptacle and the fuse of
the power supply.
 Check the power cable, the power plug,
the electrodes and possibly the recep-
tacle of the device.
 Turn on the appliance.
Suction turbine turns off
 Empty the container.
Suction turbine does not start again
after the container has been
 Turn off the appliance and wait for 5
seconds, turn it on again after 5 sec-
onds.
 Clean the electrodes as well as the
space between the electrodes with a
brush.
Suction capacity decreases
 Remove choking of suction nozzle, suc-
tion tube, elbow, handle, suction hose,
or flat folded filter.
 Replace the paper or fleece filter bag.
 Press and hold the button on the handle
and press the button for the semi-auto-
matic filter cleaning 5 times.
 Ensure the filter cover properly locks
into place.
 Replace the flat pleated filter.
 Clean the exhaust filters under running
water and let them dry off.
Dust comes out while vacuuming
 Check for proper installation of the flat
pleated filter.
 Ensure the filter cover properly locks
into place.
 Replace the flat pleated filter.
 Clean the exhaust filters under running
water and let them dry off.
– 4
EN
emptied

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Nt 14/1 ap te adv

Table des Matières