Publicité
Les langues disponibles
Les langues disponibles
Appendix
Important Safety
Instructions
This chapter describes important safety instructions
for the prevention of injury to users of this machine
and others, and damage to property. Read this
chapter before using the machine, and follow the
instructions to use the machine properly. Do not
perform any operations not described in this manual.
Canon will not be responsible for any damages
resulting from operations not described in this
manual, improper use, or repair or changes not
performed by Canon or a third party authorized by
Canon. Improper operation or use of this machine
could result in personal injury and/or damage requiring
extensive repair that may not be covered under your
Limited Warranty.
WARNING
Indicates a warning concerning operations
that may lead to death or injury to persons if
not performed correctly. To use the machine
safely, always pay attention to these warnings.
CAUTION
Indicates a caution concerning operations
that may lead to injury to persons if not
performed correctly. To use the machine
safely, always pay attention to these cautions.
IMPORTANT
Indicates operational requirements and
restrictions. Be sure to read these items
carefully to operate the machine correctly, and
avoid damage to the machine or property.
Installation
To use this machine safely and comfortably, carefully
read the following precautions and install the
machine in an appropriate location.
WARNING
Do not install in a location that may result in a fi re
or electrical shock
• A location where the ventilation slots are
blocked (too close to walls, beds, sofas, rugs,
or similar objects)
• A damp or dusty location
• A location exposed to direct sunlight or
outdoors
• A location subject to high temperatures
• A location exposed to open fl ames
• Near alcohol, paint thinners or other
fl ammable substances
Other warnings
• Do not connect unapproved cables to this
machine. Doing so may result in a fi re or
electrical shock.
• Do not place necklaces and other metal
objects or containers fi lled with liquid on the
machine. If foreign substances come in
contact with electrical parts inside the
machine, it may result in a fi re or electrical
shock.
• If any foreign substance falls into this machine,
unplug the power plug from the AC power
outlet and contact your local authorized Canon
dealer.
CAUTION
Do not install in the following locations
The machine may drop or fall, resulting in injury.
• An unstable location
• A location exposed to vibrations
IMPORTANT
Do not install in the following locations Doing
so may result in damage to the machine.
• A location subject to temperature and
humidity extremes, whether low or high
• A location subject to dramatic changes
in temperature or humidity
• A location near equipment that
generates magnetic or electromagnetic
waves
A laboratory or location where chemical
reactions occur
• A location exposed to corrosive or toxic
gases
• A location that may warp from the weight
of the machine or where the machine is
liable to sink (a carpet, etc.)
Avoid poorly ventilated locations
This machine generates a slight amount of ozone
and other emissions during normal use. These
emissions are not harmful to health. However,
they may be noticeable during extended use or
long production runs in poorly ventilated rooms.
To maintain a comfortable working environment,
it is recommended that the room where the
machine operates be appropriately ventilated.
Also avoid locations where people would be
exposed to emissions from the machine.
Do not install in a location where
condensation occurs
Water droplets (condensation) may form inside
the machine when the room where the machine
is installed is heated rapidly, and when the
machine is moved from a cool or dry location to
a hot or humid location. Using the machine
under these conditions may result in paper jams,
poor print quality, or damage to the machine. Let
the machine adjust to the ambient temperature
and humidity for at least 2 hours before use.
Avoid installing the machine near computers
or other precision electronic equipment.
Electrical interference and vibrations generated by
the machine while printing can adversely aff e ct
the operation of such equipment.
Avoid installing the machine near televisions,
radios, or similar electronic equipment.
The machine might interfere with sound and
picture signal reception.
Insert the power plug into a dedicated power
outlet, and maintain as much space as possible
between the machine and other electronic
equipment.
In altitudes of above sea level 3,000 m or
higher
Machines with a hard disk may not operate
properly when used at high altitudes of about
3,000 meters above sea level, or higher.
When using wireless LAN
• Install the machine at a distance of 50
meters or less from the wireless LAN router.
• As far as possible, install in a location
where communication is not blocked by
intervening objects. The signal may be
degraded when passing through walls or fl
oors.
• Keep the machine as far as possible from
digital cordless phones, microwave ovens,
or other equipment that emits radio waves.
• Do not use near medical equipment. Radio
waves emitted from this machine may
interfere with medical equipment, which
may result in malfunctions and accidents.
If the operating noise concerns you
Depending on the use environment and
operating mode, if the operating noise is of
concern, it is recommended that the machine be
installed in a place other than the offi ce.
Moving the Machine
If you intend to move the machine, even to a
location on the same fl oor of your building, contact
your local authorized Canon dealer beforehand. Do
not attempt to move the machine yourself.
Power Supply
WARNING
• Use only a power supply that meets the
specified voltage requirements. Failure
to do so may result in a fi re or electrical
shock.
• The machine must be connected to a
socket-outlet with grounding
connection by the provided power
cord.
• Do not use power cords other than the
one provided, as this may result in a fi re
or electrical shock.
• The provided power cord is intended
for use with this machine. Do not
connect the power cord to other
devices.
• Do not modify, pull, forcibly bend, or
perform any other act that may
damage the power cord. Do not place
heavy objects on the power cord.
Damaging the power cord may result in
a fi re or electrical shock.
• Do not plug in or unplug the power
plug with wet hands, as this may result
in an electrical shock.
• Do not use extension cords or multi-
plug power strips with the machine.
Doing so may result in a fi re or electrical
shock.
• Do not wrap the power cord or tie it in
a knot, as this may result in a fi re or
electrical shock.
• Insert the power plug completely into
the AC power outlet. Failure to do so
may result in a fi re or electrical shock.
• Remove the power plug completely
from the AC power outlet during a
thunder storm. Failure to do so may
result in a fi re, electrical shock, or
damage to the machine.
• Make sure that the power supply for
the machine is safe, and has a steady
voltage.
• Keep the power cord away from a heat
source; failure to do this may cause the
power cord coating to melt, resulting in
a fire or electrical shock.
Avoid the following situations:
If excessive stress is applied to the connection
part of the power cord, it may damage the
power cord or the wires inside the machine may
disconnect. This could result in a fi re.
• Connecting and disconnecting the power
cord frequently.
• Tripping over the power cord.
• The power cord is bent near the
connection part, and continuous stress is
being applied to the power outlet or the
connection part.
• Applying excessive force on the power
plug.
CAUTION
Install this machine near the power outlet and
leave suffi cient space around the power plug so
that it can be unplugged easily in an emergency.
En
17
Publicité
