Worx WX317 Mode D'emploi page 7

VIBRATION INFORMATION
Vibration total values (triax vector sum) determined according to EN 60745:
Impact drilling into
concrete
Drilling into metal
The declared vibration total value may be used for comparing one tool with another, and may
also be used in a preliminary assessment of exposure.
WARNING: The vibration emission value during actual use of the power tool can differ
from the declared value depending on the ways in which the tool is used dependant on
the following examples and other variations on how the tool is used:
How the tool is used and the materials being cut or drilled.
The tool being in good condition and well maintained.
The use the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti vibration accessories are used.
And the tool is being used as intended by its design and these instructions.
This tool may cause hand-arm vibration syndrome if its use is not adequately managed.
WARNING: To be accurate, an estimation of exposure level in the actual conditions of
use should also take account of all parts of the operating cycle such as the times when
the tool is switched off and when it is running idle but not actually doing the job. This may
significantly reduce the exposure level over the total working period.
Helping to minimise your vibration exposure risk.
ALWAYS use sharp chisels, drills and blades
Maintain this tool in accordance with these instructions and keep well lubricated (where appropriate)
If the tool is to be used regularly then invest in anti vibration accessories.
Avoid using tools in temperatures of 10
Plan your work schedule to spread any high vibration tool use across a number of days.
ACCESSORIES
Auxiliary handle
Depth gauge
HSS drill bit
Masonry drill bit
We recommend that you purchase your accessories from the same store that sold you the tool.
Refer to the accessory packaging for further details. Store personnel can assist you and offer
advice.
Impact drill
Vibration emission value
Uncertainty K= 1.5m/s²
Vibration emission value
Uncertainty K= 1.5m/s²
C or less
0
WX317
1
1
/
/
WX317 WX317.2
a = 6.435m/s
2
h ID
a = 4,046m/s
2
h D
WX317.2
1
1
/ 3 (5mm, 6mm, 8mm)
/ 3 (6mm, 8mm, 10mm)
WX318
a = 9,217m/s
2
h ID
a = 7,288m/s
2
h D
WX318
1
1
EN
7