Publicité
Les langues disponibles
Les langues disponibles
Temperature taking hints
Always replace disposable lens filters to maintain accuracy and hygiene. The right ear measurement may
differ from the measurement taken in the left ear. Therefore, always take the temperature in the same ear.
The ear must be free from obstructions or excess earwax build-up to take an accurate reading.
External factors may influence ear temperatures, including:
Factor
Poor probe placement
Used lens filter
Dirty lens
In the cases below, wait 20 minutes prior to taking a temperature.
Factor
Extreme hot and cold room temperature
Hearing aid
Lying on pillow
Use the untreated ear if ear drops or other ear medications have been placed in the ear canal.
Memory mode
The last temperature
1
taken is stored in the
memory and will be
automatically displayed
for 5 seconds when it is
turned on again.
This model stores the last
2
9 temperature measurements.
To display the stored
measurement, the
thermometer must be
turned on.
Press the Mem button.
3
The display shows the temperature, and when
releasing the Mem button, the stored temperature
for that memory number is displayed, together
with "M".
Each time the Mem button is pushed, the stored
4
reading and an M is displayed to indicate each
temperature measurement (eg. M2).
Memory mode is automatically exited by not
pressing the memory button for 5 seconds.
Yes affects
Yes affects
7
Publicité
