BADU Eco Motion Fiche Technique page 31

Manual operation
MANUAL OPERATION
SPEED
START
Backwash - Manual
BACKWASH
SPEED
PERIOD
START
Pool cleaner
POOL CLEANER
SPEED
PERIOD
START
Party mode
PARTY MODE
SPEED
PERIOD
START
Purge
PURGE
START MAX. SPEED
PULSE OP PERIOD
START
06|2017
In manual operation a speed can be set
MANUAL
with which the pump runs continuously
100 %
and independently of the set filter times.
STOP
WG27.50.058-2-P
The backwash process can be started
MANUAL
manually outside the set backwash
80 %
1:30 MIN
interval by using the "Backwash-
Manual" menu.
STOP
The basic settings for backwashing are
WG27.50.059-2-P
carried out in the "Backwash" menu.
The speed and duration with which the
MANUAL
pump is to run can be set in the "Pool
100 %
1:00
cleaner" programme. After the set time
has expired, the programme stops and
STOP
returns automatically to the normal filter
WG27.50.060-2-P
mode, in as fas as it was activated.
The speed and duration with which the
MANUAL
pump is to run can be set in the "Party
100 %
3:00
mode" programme. After the set time
has expired, the programme stops and
STOP
returns automatically to the normal filter
WG27.50.061-2-P
mode, in as far as it was activated.
The pipe can be purged with this
MANUAL
programme.
3 MIN
10 MIN
The duration of the maximum speed and
of the pulse operation can be set.
STOP
WG27.50.062-2-P
First the pump starts up with the
maximum speed and then alternates
rapidly between the lowest and the
highest speed in pulse operation.
EN 31