Grandstream GRP2615 Guide D'installation Rapide page 5

PHONE CONFIGURATION:
1. Ensure your phone is powered up and connected to the Internet.
2. Press and hold the "UP" button for 3 seconds to see the IP address.
3. Type the phone's IP address in your PC browser.
4.
(The factory default username is "admin" while the default random password
can be found on the sticker at the back of the unit).
1. Make sure the phone is idle.
2.
3.
Outbound Proxy, SIP User ID, SIP Auth ID and SIP Password.
4.
ample: the IP address if using a static IP. For details, please check GRP2600
series User Manual.
5. Please contact your ITSP for additional settings that may be necessary to
Refer to online documents and FAQ for more detailed information:
http://www.grandstream.com/our-products
This product is covered by one or more of the U.S. patents (and any foreign patent
~5~
ZH
GRP2615不预设对医院，执法机构，医疗中心(急
救服务)以及各种紧急服务的紧急通话服务。用户必
须自行设定紧急通话功能。用户必须自行购买SIP兼
容的网络电话服务，正确地设定GRP2615使用该服
务，并定期测试您的配置以确保GRP2615如预期工
作，否则请购买传统无线或有线电话服务来拨打紧
急通话。
Grandstream Networks 公司的 GRP2615不支持紧
急通话服务。Grandstream Networks 公司、其管理
者和员工以及其相关机构对此所造成的任何索赔、
损失或者损害都不负有任何法律追究责任。在此，
您将无权对任何以及所有由于无法通过GRP2615拨
打紧急电话以及没有遵照前段文字描述而造成紧急
通话失败的事件提出诉讼。
-
~6~