Audio Settings - Sony SMP-N100 Mode D'emploi

Masquer les pouces Voir aussi pour SMP-N100:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

z
• When connecting the HDMI OUT jack and other
video output jacks at the same time, select
"Component Video."
• If no picture appears when setting "HDMI" or
"Component Video" resolution, try another
resolution setting.
YCbCr/RGB (HDMI)
Auto
Automatically detects the
connected TV type, and
switches to the matching
color setting.
YCbCr (4:2:2) Outputs YCbCr 4:2:2 video
signals.
YCbCr (4:4:4) Outputs YCbCr 4:4:4 video
signals.
RGB
Outputs RGB video signals.
HDMI Deep Color Output
Auto
Normally select this.
12bit
Outputs 12bit/10bit video
signals when the connected
10bit
TV is compatible with Deep
Color.
Off
Select this when the picture
is unstable or colors appear
unnatural.
Pause Mode
Auto
Normally select this.
Dynamic moving pictures
appear without blurring.
Frame
Displays static pictures at
high resolution.

Audio Settings

Audio (HDMI)
Auto
Normally select this.
Outputs audio signals
according to the status of the
connected HDMI device.
PCM
Outputs PCM signals from
the HDMI OUT jack.
Dolby Digital
Downmix
Converts to output Linear
PCM
PCM signals. Select this
when connecting an audio
device without a built-in
Dolby Digital decoder.
Dolby Digital
Select this when connecting
an audio device with a built-
in Dolby Digital decoder.
DTS
Downmix
Converts to output Linear
PCM
PCM signals. Select this
when connecting to an audio
device without a built-in
DTS decoder.
DTS
Select this when connecting
to an audio device with a
built-in DTS decoder.
Audio DRC
Auto
Performs playback at the
dynamic range specified by
the current file.
Standard
Performs playback at a
standard compression level.
Wide Range
No compression works. A
more dynamic sound is
produced.
US
19
,continued

Publicité

Chapitres

Table des Matières
loading

Table des Matières