Gaspardo ALITALIA Emploi Et Entretien page 55

LIFTING THE COMBINED SEED DRILL-HARROW (Fig. 7)
WARNING!
When handling the combined seed drill and harrow, a few arrangements are required:
1) Minimise movement of the back roller of the rotating harrow by bringing the adjustment pins as close as possible to the connection
arm.
The belt lengths shown are merely for indication.
Adjust the length of the belts to make the machine level during lifting operations.
• Packaging materials (pallets, cartons, etc.) must be disposed of as prescribed by the existing regulations through authorised
disposal companies.
• Parts making up the machine must not be lifted by hooking them up from moving or weak parts such as guards, electrical
runways, pneumatic parts, etc.
• Standing under suspended loads is not allowed; unauthorised personnel are not allowed access to the work sites; it is
mandatory to wear overalls, safety footwear, gloves and a hardhat.
cod. G19503391
USE AND MAINTENANCE
fi g. 7
L1
1

L2
L2
ATTENTION
ENGLISH
Model L1
(cm)
ALITALIA 300 215
ALITALIA 350 215
ALITALIA 400 215
EN - 55
L2
(cm)
270
290
310