Roche Accu-Chek Performa Manuel D'utilisation page 12

2
Blood Glucose Tests
Before you perform your first blood glucose test, set up the meter correctly. You need the meter, a test strip,
a lancing device, and a lancet.
1
Prepare the lancing
device.
Wash and dry your hands.
5
When the blood drop Gently squeeze your
symbol flashes, perform a finger to assist the blood
fingerstick with the flow.
lancing device.
This helps you get a
blood drop.
10
51826_07054246001_01_EN.indb 10
2
3
Check the use by date on
the test strip container.
Do not use test strips
past the use by date.
6
Touch the blood drop to the front edge of the yellow
window of the test strip.
Do not put blood on top of the test strip.
The meter beeps and flashes when there is enough
blood in the test strip.
4
Insert the test strip into
the meter in the direction
of the arrows.
The meter turns on and
beeps.
7
9/26/13 2:07 PM