Fisher & Paykel DCS RGU Guide D'utilisation page 14

Oven use
12
US
CA
To insert the shelves - MAIN OVEN
Guard rail
Make sure the guard rail is at the back,
1
facing up and the slides are not extended.
Rear tag
Hook the rear tags over the wires of the
3
desired shelf position on both side racks.
To remove the shelves
Wait for the oven to cool down completely.
1
Hold the shelf firmly with both hands, making sure you grip the wire shelf too to stop it sliding
2
forward.
Pull the shelf forward about ¾ of the way.
3
Lift the rear of the shelf slightly so that the tags clear the side rack wires, then remove.
4
Hold the shelf firmly with both hands,
2
making sure you grip the wire shelf too to
stop it sliding forward.
Front tag
Push the shelf all the way into the oven,
4
ensuring the front and rear tags either side
are securely locked behind the side rack
wires.