Throttle Cable Free Play Adjustment - Yamaha RX10RTL Supplément Au Manuel D'atelier

THROTTLE CABLE FREE PLAY ADJUSTMENT

THROTTLE CABLE FREE PLAY
ADJUSTMENT
NOTE: NOTE:
• Before adjusting the throttle cable free play,
the engine idle speed should be adjusted.
• Adjust the throttle cable free play while the
cable is in the cable guide.
1. Measure:
• Throttle cable free play
Out of specification → Adjust.
Throttle cable free play:
2.0 ~ 3.0 mm (0.08 ~ 0.12 in)
2. Adjust:
• Throttle cable free play
Adjustment steps:
• Loosen the locknut
• Turn the adjusting nut
specified free play is obtained.
Turning in → Free play is increased.
Turning out → Free play is decreased.
• Tighten the locknut.
NOTE: NOTE:
After adjusting the free play, turn the handlebar
to right and left, and make sure that the engine
idling does not run faster.
13
INSP
ADJ
.
in or out until the