Rear Suspension - Yamaha RX10RTL Supplément Au Manuel D'atelier

REAR SUSPENSION

REAR SUSPENSION
Spring preload (RX10GTL)
1. Adjust:
• Spring preload
Adjustment step:
• Loosen the locknut
• Adjust the spring preload by turning the
spring seat
.
Front
Spring seat
Shorter ←
distance
Harder ←
Preload
Min.
Length
265 mm
(10.43 in)
• Tighten the locknut
WARNING
This shock absorber contains highly pres-
surized nitrogen gas.
Do not tamper with or attempt to open the
shock absorber assembly.
Do not subject the shock absorber assem-
bly to flames or high heat, which could
cause it to explode.
Damping (RX10GTL)
1. Adjust
• Damping
Adjustment step:
• Press the mode switch
• Make sure to switch the multi-function meter
to the electric suspension adjustment indica-
tor .
• To harden the suspension, push the electric
suspension/grip warmer adjustment switch
located at the left handlebar switch
"HI" side, or push it to the "LO" side to soften
and adjust.
28
INSP
ADJ
.
Standard
→ Longer
→ Softer
Max.
285 mm 287 mm
(11.22 in) (11.30 in)
.
to the