Baxi LUNA HT 380 Notice D'installation Et D'entretien page 24

Dual Flue Adapter Instructions (for Canada only)
WARNING
ABS/PVC venting is no longer approved to be used in Canada.
INSTALLATION AND SERVICING INSTRUCTIONS
WARNING
All vent pipe, combustion air pipe and fitting must comply with the following:
CPVC schedule 40 D1785, ANSI/ASTM D2661, ANSI/ASTM F441 in Canada,
ULC S636 certified only
DO NOT USE CELLULAR CORE PIPE
ONLY 3" PIPES ARE PERMITTED
When using venting materials other than the boiler manufacture's venting,
note the correct installation procedure. The CPVC adapter shown in figure 17
must be used to transition to CPVC vent material.
Assembling Instructions
1. Fit the black gasket piece to the adapter over the aluminium coupling
2. To fasten the adapter to the top of the boiler push the adapter into the open
intake flue and fasten together using the screw clamp provided with the adap-
ter
3. Once the adapter is secure, place the 3 inch CPVC ULC S636 pipe into the
open end of the adapter
4. Fasten the adapter to the CPVC pipe using the second screw clamp provided
with the adapter
Note:
When venting with CPVC you must use the Baxi horizontal CPVC termination kit
Fig. 17
24
7109741.01 - en