Taking The Machine Into Service - BEHAbelt RS02 Consignes D'installation Et Mode D'emploi

2.2 TAKING THE MACHINE INTO SERVICE

2.2.1 INSERT THE BATTERY PACK
Insert the battery pack until it engages audibly.
2.2.2. TURN ON
The switch must be at the OFF position, i.e. the «0» is visible. To switch ON the tool, press
the switch, and push it forwards until it engages audibly, i.e. the «1» becomes bisible.
ATTENTION! Machine not turn without clamped belt material. Danger of releasing
clamping jacks.
20