Control Elements; Safety Instructions - BEHAbelt RS02 Consignes D'installation Et Mode D'emploi

8

3.1 CONTROL ELEMENTS

1) Drive motor
2) ON/OFF switch
3) Excentric drive
4) Clamping equipment
5) Centre lever
6) Release button key
7) Adjusting knob for contact pressure
8) Profi le jaws
9) Adapter for standard profi les
10) Hexagonal head bolt to clamp the profi le
3.2 SAFETY INSTRUCTIONS FOR WORK SEQUENCE
For all work, the applicable accident prevention regulations of the professional as-
sociation must be observed.
The friction welding machine RS02 may only be held on the handles provided for
this. Touching the welding head during operation must be avoided at all costs.
2
1
6
5
4
3
7
10
9
23