Ribimex RIBILAND PRS650 Manuel D'instructions Et D'utilisation page 12

EN –
Original instructions
I. Presentation
II. Characteristics
I. PRESENTATION
1.1. Intended Use:
The sharpener is intended for sharpening use of chains of chainsaws.
1.2. Not Intended Use:
Do not use for grinding or cutting wood, plastic or non-ferrous metals with normal disks.
Do not use the flat side of the disk for grinding or sharpening.
Do not use sharpener for abrasive cutting.
1.3. Residual Risks
Even when the tool is used as prescribed it is not possible to eliminate all residual risk factors.
1.4. Parts List
1. Handle
2. On/Off switch
3. Grinding depth setting knob
4. Base
5. Holes for workbench installation
6. Rotary table angle setting wheel
7. Scale
8. Rotary table
9. Chain guide locking screw
10. Chain guide
11. Chain stopper setting knob
12. Chain link stopper
13. Grinding disk
14. Disk protective guard
15. Motor
III. Safety instructions
IV. Getting Started
V. Operation
VI. Maintenance and Storage
Fig.1
Page 12 of 32