Yamaha A-S2100 Mode D'emploi page 13

5 p CD key
Turns the Yamaha CD player ON or switches it to
STANDBY mode.
6
OPEN/CLOSE key
Opens/closes the disc tray of the Yamaha CD player.
Refer to the owner's manual of your CD player for
details.
Note
Some Yamaha CD players do not support the
or OPEN/CLOSE key of this remote control.
7 Yamaha CD player control keys
Control various functions of Yamaha CD player. Refer
to the owner's manual of your CD player for details.
(Play): Starts playback.
(Pause): Pauses playback. Press the
resume playback.
(Stop): Stops playback.
/ (Skip): Skips to the next track, or skips
back to the beginning of the current track.
SOURCE: Selects the source to be played on the
Yamaha CD player. The playback source changes
each time this key is pressed.
LAYER: Switches the playback layer of a hybrid SA-
CD between SA-CD and CD.
8 VOLUME +/– keys
Control the volume level.
Note
The VOLUME keys do not affect when you select MAIN
DIRECT as the input source. Adjust the volume level on the
external amplifier connected to the MAIN IN jacks.
9 MUTE key
Reduces the current volume level by approximately
20 dB. Press again to restore the audio output to the
p
CD key and/
previous volume level. Pressing the VOLUME + or –
key also cancels muting.
or to
13
En