Fisher & Paykel AquaSmart WL4027P Instructions D'installation Et Guide D'utilisation page 44

Changing pre-set options
US
42
CA
Factory reset
You can reset your washer to the default settings it left the factory with.
To reset your washer to its factory settings:
Enter Option Adjustment mode (refer to page 38).
1
For the WL4027P model: select the EASY IRON cycle (Fig.33).
2
For the WL4027 G model: select the DELICATE cycle (Fig.34).
The display will show
3
factory settings.
Note: this action will reset the washer to the default settings, exit Option Adjustment mode and
power off your washer.
Touch POWER to exit if you do not wish to reset your washer.
Fig.33 Changing the washer settings back to the factory default (WL4027P)
Fig.34 Changing the washer settings back to the factory default (WL4027G)
Remember, to save changes and exit from the Option Adjustment mode at any time (ie to return
to normal operating mode), touch the POWER button.
. Touch START/PAUSE for 3 seconds to reset your washer to its
Wash Temp
OOB Recovery
EOC Beeps
Factory Reset
Wash OOB Factory
Temp Recovery Reset
EOC
Beeps