Fisher & Paykel AquaSmart WL4027P Instructions D'installation Et Guide D'utilisation page 41

Adjusting your options
Enter the Option Adjustment mode (refer to page 38).
1
The diagrams below show how the wash cycle icons relate to the pre-set options you can change.
2
They also show what will be displayed when you first enter Option Adjustment mode.
WL4027P model
Options you can change are accessible using the HEAVY, DELICATE, SHEETS and EASY IRON cycles only.
Use Fig.25 to help you adjust the options, eg select the HEAVY cycle to modify the cold wash
temperature, select the DELICATE cycle to change the out of balance (OOB) recovery process, and
so on.
Fig.25 Option Adjustment mode (WL4027P)
WL4027G model
Options you can change are accessible using the REGULAR, HEAVY, DELICATE and BULKY cycles only.
Use Fig.26 to help you adjust the options, eg select the REGULAR cycle to modify the cold wash
temperature, select the HEAVY cycle to change the out of balance (OOB) recovery process, and
so on.
Fig.26 Option Adjustment mode (WL4027G)
Use the MORE
3
display to scroll through the available settings of your selected option.
mp
OB Recovery
EOC Beeps
Factory Reset
Wash Temp
OOB Recovery
EOC Beeps
Factory Reset
Wash OOB Factory
Temp Recovery Reset
EOC
Beeps
and LESS (where available) DELAY START buttons underneath the digital
Fig.27 Changing
the pre-set options
Wash OOB Factory
Temp Recovery Reset
(WL4027P)
EOC
Beeps
Changing pre-set options
Fig.28 Changing
the pre-set options
(WL4027G)
US
39
CA