Tilt Lock Mechanism - Yamaha 40VEO Manuel D'utilisation

TACH TACH
q
5 5
4 4
x100 x100
3 3
r/min r/min
2 2
1 1
802014
q
402036
2-21
cC
Do not operate the engine without oil.
Serious engine damage will occur.
EMU00139
Overheat Warning Indicator
If the engine temperature rises too high,
the warning indicator will start to blink.
Refer to "OVERHEAT WARNING" for the
detail.
1 Overheat warning indicator
cC
Do not continue to operate the engine if a
warning device has activated. If neces-
sary, refer to the "TROUBLESHOOTING"
section in this manual. Consult your deal-
er if the problem cannot be located and
corrected.
EMD44010
TILT LOCK MECHANISM (for Manual
tilt model)
The tilt-lock mechanism is used to pre-
vent reverse thrust from the propeller lift-
ing the outboard motor when reversing.
To lock it, set the tilt-lock lever in the up
position. To release it, push the tilt-lock
lever down.
1 Tilt-lock lever
E