Publicité
N
EMF65010
PROCEDURE FOR REMOTE
CONTROL MODEL
4) Place the remote control lever in the
Neutral position.
NOTE:
8 The start-in-gear protection device pre-
vents the engine from starting except
when in Neutral.
701015
8 It is not necessary to open the free
accelerator lever or Neutral throttle
lever while starting.
5) Attach the engine stop switch lanyard
to a secure place on your clothing, or
your arm or leg. Then, install the lock
plate on the other end of the lanyard
in the engine stop switch.
w
701025
8 Attach the engine stop switch lanyard
to a secure place on your clothing, your
arm or leg while operating.
8 Do not attach the lanyard to clothing
that could tear loose. Do not route the
lanyard where it could become entan-
gled, preventing from functioning.
8 Avoid accidentally pulling the lanyard dur-
ing normal operation. Loss of engine power
means the loss of most steering control.
Also, without engine power, the boat could
slow rapidly. This could cause people and
objects in the boat to be thrown forward.
6) Turn the main switch to "ON".
3-16
E
Publicité
Chapitres
Dépannage
