Publicité
e
cC
8 Make sure the main switch (on applica-
ble models) is "OFF" before working on
the battery.
8 Reversal of the battery leads will dam-
age the rectifier.
8 Connect the RED lead first when
installing the battery and disconnect
the RED lead last when removing it.
Otherwise, the electrical system can be
damaged.
8 The electrical contacts of the battery
and cables must be clean and properly
connected, or the battery will not start
the engine.
Connect the RED lead to the POSITIVE (+)
terminal first.
Then connect the BLACK lead to the NEG-
ATIVE (-) terminal.
1 Red lead
2 Black lead
3 Battery
q
EMU01280
Disconnecting the Battery
w
Disconnect the BLACK lead from the NEG-
ATIVE (-) terminal first. Then disconnect
the RED lead from the POSITIVE (+) termi-
901012
nal.
EML40010
CHECKING BOLTS AND NUTS
1) Check that bolts securing the cylinder
2) Check the tightening torques of other
4-28
head and engine and the nut securing
the flywheel are tightened with their
specified tightening torques.
bolts and nuts.
E
Publicité
Chapitres
Dépannage
