Gasoline (Petrol) And Oil Mixing - Yamaha 40VEO Manuel D'utilisation

EMF35012
GASOLINE (PETROL) AND OIL
q
MIXING
Pre-mix model
Engine oil : Gasoline (Petrol)
Break-in period 1 : 25
w
After break-in
1) Pour oil and gasoline into the fuel
tank, in that order.
1 Engine oil
2 Gasoline (Petrol)
2) Then mix the fuel thoroughly by shak-
ing.
3) Make sure the oil is mixed with gaso-
line .
cC
8 Avoid using any oil other than the des-
ignated type.
902034*
8 Use a thoroughly blended fuel-oil mix-
ture.
8 If the mixture is not thoroughly blend-
ed, or if the mixing ratio is incorrect,
the following problems could occur:
Low oil ratio: Lack of oil could cause
major engine trouble, such as piston
seizure.
High oil ratio: Too much oil could cause
fouled spark plugs, smoky exhaust, and
heavy carbon deposits.
Mixing ratio
Gasoline (Petrol)
Engine oil
NOTE:
If using a permanently installed tank, pour
the oil gradually as the fuel is being
added to the tank.
3-8
1 : 50
50 : 1
1 L 12 L 14 L
(0.26 US gal, (3.2 US gal, (3.7 US gal, (6.3 US gal,
0.22 Imp gal) 2.6 Imp gal) 3.1 Imp gal) 5.3 Imp gal)
0.02 L 0.24 L 0.28 L
(0.02 US qt, (0.25 US qt, (0.30 US qt, (0.51 US qt,
0.02 Imp qt) 0.21 Imp qt) 0.25 Imp qt) 0.42 Imp qt)
E
24 L
0.48 L