Tilt Lock Mechanism; Flushing Device - Yamaha F40C Manuel D'utilisation

GB
EMD58200*
TILT-LOCK MECHANISM
(for hydro-tilt model)
Tilt-lock mechanism is used to prevent
reverse thrust from the propeller lifting
the outboard motor when reversing. To
lock it, set the tilt-lock lever in the Lock
q
position. To release it, place the tilt-lock
lever in the Tilt position.
000968
1 Tilt-lock lever
NOTE:
The tilt-lock mechanism on the hydro-tilt
model can be used to keep the outboard
motor at a slightly tilted angle for shallow
water cruising. Refer to CRUISING IN
SHALLOW WATER for the correct opera-
tion.
EMU01546

FLUSHING DEVICE

This device 1 is used to clean the cooling
q
water passages of the motor using a gar-
den hose and tap water.
NOTE:
Refer to "CLEANING COOLING-WATER
PASSAGES" in Chapter 4 for instructions
on usage.
001239
2-14