Yamaha F40C Manuel D'utilisation page 160

w
e
t
q
EMU01577
F40C/FT50C/F60
NOTE:
If any water is in the fuel, the float 5 will
rise. If so, remove the cup and drain the
water.
1) Remove the nut holding the fuel filter
assembly if so equipped.
000960
2) Unscrew the filter cup 1, catching
any spilled fuel in a rag.
3) Remove the filter element 2, and
r
wash it in solvent.
Allow it to dry. Inspect the filter ele-
ment and O-ring 3 to make sure they
are in good condition. Replace them if
necessary.
4) Reinsert the float in the filter cup,
making sure the indentations in the
000309
float ring match the ribs inside the fil-
ter cup. Reinstall the filter element in
the cup. Make sure the O-ring is in
proper position in the cup. Firmly
screw the cup onto the filter housing
4.
5) Attach the filter assembly to the
bracket.
6) Run the engine and check the filter
and lines for leaks.
4-22
GB