Publicité
Les langues disponibles
Les langues disponibles
Fluidized Bed Filter FR 509 - FR 1020
Maximum absorption efficiency for Filter media like Deltec AC Phosphatadsorber , AC Special Carbon and
others is archieved by using
effective bio filter.
Installation
-
FR filters can be installed inside (if space allows) the sump or remote from aquarium and filter sump.
-
Connect the FR filter to a pump or bypass of the aquariums filtration system.
-
Remove the lid by turning it anticlockwise.
-
Rinse the media thoroughly if not it may cloud the water temporally.
-
Fill in the media; cover the central dawn pipe during the process.
-
DO NOT OVERFILL
-
Make sure that the sponges are in the correct position and that the Lid O-Ring is clean and in position.
-
Replace the lid and turn clockwise.
-
Close the tap an the FR filter and switch on the water supply.
-
Open the tap slowly to achieve a steady circulation inside the FR filter.
CHECK FOR ANY LEAKS
General
The FR filters should ran continuously. When using it in combination with a "Kalkwasser" stirrer, ensure that
the "Kalkwasser" is not fed directly into the FR filter.
With aquaria containing initially high levels of Phosphate, Rowaphos may have to be renewed after a short
period of time i.e. If the phosphate level coming out of the FR filter is the same as in the aquarium.
Maintenance
The FR filter should be cleaned thoroughly and if necessary sponges replaced every time the media is
renewed.
technical data
FR 509
FR 512
FR 616
FR 1016
FR 1020
a FR filter.
Dimensions (l/w/h)
appr.
180 x 140 x 500 mm
280 x 200 x 580 mm
300 x 250 x 600 mm
300 x 250 x 1000mm
350 x 300 x 1000mm
"FR" Series filter can also be used as a very
filtermaterial
1,2 Liter
2,6 Liter
4,6 Liter
9,0 Liter
14,0 Liter
water flow rate dependently
of filtermaterial
500 Ltr./Std.
1500 Ltr./Std.
2000 Ltr./Std.
2000 Ltr./Std.
3000 Ltr./Std.
EN
Publicité
