Philips Avance Collection HD9640 Guide D'utilisation page 11

Masquer les pouces Voir aussi pour Avance Collection HD9640:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

2 Unwind the power cord from the cord storage wrap. (Fig. 13)
3 Put the plug in the wall outlet.
4 Remove the pan from the appliance. (Fig. 14)
5 Put the ingredients in the basket. (Fig. 15)
Note
• The Airfryer can prepare a large range of ingredients. Consult the 'Food table'
for the right quantities and approximate cooking times.
• Do not exceed the amount indicated in the 'Food table' section or overfill the
basket beyond the 'MAX' indication as this could affect the quality of the end
result.
• If you want to prepare different ingredients at the same time, make sure you
check the suggested cooking time required for the different ingredients before
you start to cook them simultaneously. Home-made fries and drumsticks,
for example, can be cooked simultaneously because they require the same
settings.
6 Place the basket back into the pan, slide the pan back into the appliance. Press
the "Power On/Off" button to switch on the appliance. (Fig. 16).
Note
• Never use the pan without the basket in place.
7 The temperature indication blinks and is set to 350°F/180°C by default. (Fig. 17)
» To change the temperature, turn the QuickControl dial to the desired
setting. (Fig. 18)
» To confirm the temperature, push the QuickControl dial. (Fig. 19)
8
After the temperature is confirmed, the time indication "- -"starts blinking.
(Fig. 20)
» Turn the QuickControl dial to the desired setting. (Fig. 21)
» To confirm the cooking time, push the QuickControl dial. (Fig. 22)
9 The appliance starts cooking after the cooking time has been confirmed.
Tip
• To pause the cooking process, push the QuickControl dial. To resume the
cooking process, push the QuickControl dial again.
Note
• Some ingredients require shaking or turning halfway through the cooking
time (see 'Food table'). To shake the ingredients, push the QuickControl dial
to pause cooking, remove the pan from the appliance and shake it over the
sink. Then slide the pan back into the appliance, push the QuickControl dial to
resume cooking. To reduce the weight, you can also remove the basket from
the pan. (Fig. 23)
• Be careful not to press the basket release button while shaking.
10 When you hear the timer bell, the set preparation time has elapsed. (Fig. 24)
ENGLISH
13

Publicité

Table des Matières

Dépannage

loading

Table des Matières