Choosing The Preset Modes; Choosing The Keep Warm Mode - Philips Avance Collection HD9640 Guide D'utilisation

Choosing the preset modes

1 After the appliance is switched on, press the preset button. (Fig. 34)
» The preset indication for frozen French fries starts blinking.
2 Turn the QuickControl dial to select the preset you need. (Fig. 35)
3 Push the QuickControl dial to confirm the preset. (Fig. 36)
» The cooking temperature displays on the screen and the recommended
cooking time blinks.
» To change the cooking time, turn the QuickControl dial. (Fig. 37)
Note
• Changing the temperature is not possible when using a preset mode. If you
press the temperature button when selecting the preset mode the appliance
will exit the preset mode.
4 Push the QuickControl dial again to confirm the cooking time, and the appliance
starts cooking. (Fig. 38)
Tip
• Refer to the "Cooking table for presets" to find the suitable cooking time and
more information.

Choosing the keep warm mode

1
Press the keep warm button (you can activate the keep warm mode at each
time). (Fig. 39)
» The keep warm indication goes on.
» The keep warm timer is set to 30 minutes. You cannot adjust the keep
warm time. To stop the keep warm mode, simply switch off the appliance.
Tip
• If food like French fries loses crispness during the keep warm mode, please
either shorten the keep warm time by switching off the appliance earlier or
crisp them up for 2-3 minutes at the temperature of 350°F/180°C.
Note
• If you activate the keep warm mode during cooking, the appliance will keep
your food warm for 30 minutes after the cooking time has elapsed.
• During the keep warm mode, the fan and heater inside of the appliance is on
from time to time.
• The keep warm mode is designed to keep your dish warm immediately after it
is cooked in the Airfryer. It is not meant for reheating.
ENGLISH
15