Yamaha O1V Mode D'emploi page 282

PARAMETER VALUE REQUEST (type 0x00:edit
buffer, 0x01:sysytem memory)
Reception
When [Parameter Change RX] is ON, this message is received if the
[Rx CH] matches the Device Channel included in the SUB STATUS.
When [Parameter Change ECHO] is ON, this message will be echoed
if the device itself did not receive the message.
When this message is received, the value of the specified parameter
will be transmitted as a Parameter Change message.
Transmission
When [Parameter Change ECHO] is ON, this message will be trans-
mitted without change if the device itself did not receive the message.
STATUS 11110000 F0
ID No. 01000011 43
SUB STATUS 0011nnnn 3n
GROUOP ID 00111110 3e
MODEL ID 00000100 04
PARAM TYPE 00tttttt tt
DATA 0aaaaaaa dd0
0aaaaaaa dd1
0ddddddd dd
EOX 11110111 F7
The system memory will depend on the address, as follows.
0x0000 - 0x007F : setup memory(128byte)
0x0080 - 0x0147 : backup memory(200byte)
0x0200
PARAMETER CHANGE (type 0x02:function call)
Reception
When [Parameter Change RX] is ON, this message is received if the
[Rx CH] matches the Device Channel included in the SUB STATUS.
When [Parameter Change ECHO] is ON, this message will be ech-
oed.
When this message is received, the corresponding mem-
ory/library/table will be recalled/stored/cleared.
STATUS 11110000 F0
ID No. 01000011 43
SUB STATUS 0001nnnn 1n
GROUOP ID 00111110 3e
MODEL ID 00000100 04
PARAM TYPE 00000010 02
DATA 0ddddddd dd0
0ddddddd dd1
0ddddddd dd2
EOX 11110111 F7
function number
-----------------------------------------------------------------------------------------
0x00 scene recall 0-99(memory 0-99)
0x01 eq lib recall 0-79(library 1-80)
0x02 dyn lib recall 0-79(library 1-80)
0x03 eff lib recall 0-98(library 1-99)
0x10 scene store 1-99(memory 1-99)
0x11 eq lib store 40-79(library 41-80)
0x12 dyn lib store 40-79(library 41-80)
0x13 eff lib store 42-98(library 43-99)
Channel 0-11(ch1-12), 12-13(13/14-15/16), 14-15(return 1-2),
16-19(aux 1-4), 22(st mas), 23-30(ch17-24)
0,1(EFF1,2 for eff lib recall/store), 0x7f(current/edit
buffer)
* [0x00:scene recall] is transmitted only when a program which is not
assigned to the program change table has been recalled. In other
cases, a program change will normally be transmitted.
System Exclusive Message
Manufacturer's ID No.(YAMAHA)
parameter request n=0-15(Device Chan-
nel No.1-16)
MODEL ID
Device code (01V)
00:edit buffer, 01:system memory (type)
address( H) high 7 bits of 14 bits address
address( L) low 7 bits of 14 bits address
count
End Of Exclusive
: card type(1byte)
System Exclusive Message
Manufacturer's ID No.(YAMAHA)
parameter change n=0-15(Device Chan-
nel No.1-16)
MODEL ID
Device code (01V)
function call
function
number
channel
End Of Exclusive
channel Tx/Rx
0x7f Tx* /Rx
0-19,22 Tx/Rx
0-13,16-19,22 Tx/Rx
0,1 Tx/Rx
0x7f Rx only
0-19,22 Rx only
0-13,16-19,22 Rx only
0,1 Rx only
MIDI Data Format
PARAMETER CHANGE (type 0x02:function
call(title))
Reception
When [Parameter Change RX] is ON and the [Rx CH] matches the
Device Channel included in the SUB STATUS, this message will be
received.
When [Parameter Change ECHO] is ON, this message will be ech-
oed.
When this message is received, the title of the corresponding mem-
ory/library will be modified.
Transmission
Parameter Change messages are transmitted on the [Rx CH] channel
in response to a request.
STATUS 11110000 F0
ID No. 01000011 43
SUB STATUS 0001nnnn 1n
GROUOP ID 00111110 3e
MODEL ID 00000100 04
PARAM TYPE 00000010 02
DATA 0ddddddd dd0
0ddddddd dd1
0ddddddd dd2
:
0ddddddd ddn
EOX 11110111 F7
If 01V receives a bulk request for an empty memory, TITLEs are not
transmitted.
function number
---------------------------------------------------------------------------------------------
0x30 scene title 0-99(mem 0-99),0x7f(edit buffer)
1-99(mem 1-99),0x7f(edit buffer)
0x31 eq lib title 0-79(library 1-80)
40-79(library 41-80)
0x32 dynamics lib title 0-79(library 1-80)
40-79(library 41-80)
0x33 eff lib title 0-98(library 1-99)
42-98(library 43-99)
PARAMETER VALUE REQUEST (type 0x02:function
call(title))
Reception
When [Parameter Change RX] is ON and the [Rx CH] matches the
Device Channel included in the SUB STATUS, this message will be
received.
When [Parameter Change ECHO] is ON and the 01V itself did not
receive the message, the message will be echoed.
When this is received, the title of the corresponding memory/library
will be transmitted.
Transmission
When [Parameter Change ECHO] is ON and the 01V itself did not
receive the message, the message will be echoed.
STATUS 11110000 F0
ID No. 01000011 43
SUB STATUS 0011nnnn 3n
GROUOP ID 00111110 3e
MODEL ID 00000100 04
PARAM TYPE 00000010 02
DATA 0ddddddd dd0
0ddddddd dd1
EOX 11110111 F7
function number
---------------------------------------------------------------------------
0x30 scene title 0-99(mem 0-99),0x7f(edit buffer)
0x31 eq lib title 0-79(library 1-80)
0x32 dynamics lib title 0-79(library 1-80)
0x33 eff lib title 0-98(library 1-99)
283
System Exclusive Message
Manufacturer's ID No.(YAMAHA)
parameter change or response
n=0-15(Device Channel No.1-16)
MODEL ID
Device code (01V)
function call
function
number
title1(If data is empty, TITLEs are not
transmitted.)
:
title-n
End Of Exclusive
for response
for Rx
for response
for Rx
for response
for Rx
for response
for Rx
System Exclusive Message
Manufacturer's ID No.(YAMAHA)
parameter request n=0-15(Device Chan-
nel No.1-16)
MODEL ID
Device code (01V)
function call
function
number
End Of Exclusive
01V—Mode d'emploi